Batteries are the vital component of every uninterruptible power supply (UPS), acting as the system’s beating heart. Unexpectedly, studies show that poor battery performance might account for up to 20% of UPS failures. To protect your company from the high expenses and negative consequences of unplanned outages, you must be aware of the variables that affect UPS battery longevity and dependability.
In this article, we will explore how Multilink Engineering will provide you with ultimate solutions to expand your UPS battery life. We provide the best solutions for all the problems related to UPS batteries. So, keep reading to get the best possible solutions.
Proper Installation
A well-installed UPS battery is an essential component of its extended lifespan. Make sure the area where the UPS system is installed is cool and well-ventilated. Avoid putting the UPS in direct sunlight or next to anything that generates heat since excessive heat can drastically shorten the battery’s life.
Frequent System Inspections
Make routine system checks to find and fix any problems as soon as possible. Keep an eye out for warning lights on the UPS, test the battery frequently, and swap out any bad batteries right away. Establish a regular maintenance program to maintain the best possible state for the entire system.
Proper Charging Practices
Appropriate charging procedures are beneficial for UPS batteries. Deep discharges should be avoided at all costs since they might reduce battery life. Ensure that the UPS is constantly connected to a reliable power supply and that the batteries are routinely recharged after usage.
Optimal Temperature
Maintaining temperature management is essential for increasing UPS battery life. Set regulations in place to control the temperature in the area where the UPS is situated. To avoid overheating, think about utilizing fans or enclosures with temperature controls.
Handling Loads
A UPS system’s batteries may be strained by overloading it, which might cause an early failure. Make sure that the UPS’s capacity is not exceeded by the connected load. If more than one UPS unit is required, divide the load equally among them and stay clear of abrupt spikes in power consumption.
Frequent Evaluation
To make sure the UPS system will function reliably during a power loss, test it regularly. To keep accurate duration predictions and avoid unplanned shutdowns, calibrate your batteries. Testing often enables you to see any problems before they get serious.
High-Quality Batteries
Invest in suitable, high-quality UPS battery replacements. The UPS system’s lifetime and general functionality may be jeopardized by generic or subpar batteries. Refer to the manufacturer’s guidelines for models of acceptable batteries.
Optimizations & Improvements
Update the monitoring software and UPS firmware. Updates with optimizations and enhancements to improve battery management and overall system performance are frequently released by manufacturers.
Conclusion
You can easily increase your UPS battery lifespan with the help of these preventive measures mentioned above. Other than that, Multilink Engineering is also here to help you out. You can buy premium-quality batteries from us. We also offer repair services for UPS as well as batteries. Try us and improve your UPS battery lifespan without investing again and again.
